Banten

Loker Teknisi di PT. Ineos Aromatics Indonesia, Rawa Arum, Gerogol, Kota Cilegon, Banten, Indonesia

×

Loker Teknisi di PT. Ineos Aromatics Indonesia, Rawa Arum, Gerogol, Kota Cilegon, Banten, Indonesia

Sebarkan artikel ini

Loker pada Fungsi Teknisi pada PT. Ineos Aromatics Indonesia

Dibutuhkan kurang lebih 1 orang untuk dipekerjakan pada posisi Fungsi Kerja Teknisi pada PT. Ineos Aromatics Indonesia yang di kota Rawa Arum, Gerogol, Kota Cilegon, Banten, Indonesia

Berkaitan dengan persyaratan-persyaratan yang dibutuhkan adalah seorang dengan:

  • Gender Laki – Laki / Perempuan
  • Lulus Diploma
  • Status Perkawinan menikah & belum menikah.
  • Umur Calon Pekerja adalah antara 25 hingga 35 tahun.
  • Kondisi Tubuh Calon Pegawai: Non Disabilitas
  • Skill yang dibutuhkan: Microsoft Office

Keahlian Calon Pekerja

Education & preferred skill

  • Minimum 7 years Diploma Mechanical Engineering and work experienced of petrochemical, or oil and gas plant experienced.
  • Minimum 15 years High school and work experienced of petrochemical or oil & gas plant and turbo machinery.
  • Experience in leading trouble shooting and quick repair of mechanical equipment/facilities under urgent situation to minimize breakdowns.
  • Experienced in applying advanced technologies and best practices of Mechanical maintenance in powerplant, oil and gas or petrochemical industry.
  • Has knowledge and skills on maintenance system and process, such as preventive and predictive maintenance, equipment specific maintenance plan, SAP, and work order process etc.
  • Language skillful English reading, writing.
  • Skillful Personal Computer

Experience

  • Has basic knowledge for Preventive and Predictive Maintenance.
  • Has knowledge for maintain and repair static equipment such as Heat exchanger, tower, Furnace, drum, vessel, valve, piping component, vacuum breaker, flexible joint, bolt and nut, gasket material and check valve.
  • Has experience for repair and PM steam, rotary tube dryer, turbomachinery, vacuum pump, vacuum filter, agitator, and general rotating equipment.
  • Able to do alignment of rotating equipment.
  • Able to interpret working procedure.
  • Has knowledge of measurement and general tools.
  • Able to read equipment cross drawing and isometric drawing.
  • Has knowledge of FRP and cement lining piping.
  • Able to work independently to repair static & rotating equipment.
  • Able to lead the daily maintenance contractor to perform maintain and repair static & rotating equipment.
  • Must service oriented.
  • Able to write maintenance report and equipment problem report.
  • Quick response to call-out is required.

Batas Pendapatan

Batas Pendapatan adalah s.d. *

Diskusikan Upah yang dilayangkan tersebut dengan kebutuhan Anda juga dengan UMR kota tempat PT. Ineos Aromatics Indonesia ini terletak yakni Rawa Arum, Gerogol, Kota Cilegon, Banten, Indonesia, jika Anda dirasa cocok maka silahkan dilanjutkan, namun ketika Anda merasa tidak cocok silahkan cari lowongan lainnya sesuai keterampilan dan bakat serta upah yang Anda inginkan.

Catatan Tambahan Fungsi Loker

Tingkatan pengalaman saat sesi interview: normal

Lead Mechanical Technician

This job includes REFERRAL PROGRAM, please help to make sure Candidate and INEOS Aromatics Employee access and submit required data entry in the following Forms

https://forms.office.com/e/p8tY5z7qay

Purpose of role

  • Lead Mechanical Maintenance Technician must be able to lead other technicians and contractors in completing mechanical maintenance work.
  • Able to provide failure diagnosis and troubleshooting so that damage can be repaired.
  • Able to lead his team to complete turbomachinery, big machinery, and other mechanical work.

Key Results/ Accountabilities

People management:

  • Lead daily maintenance contractor to perform daily patrol to find out irrationality of static equipment.
  • Actively share their knowledge to train/mentor other team members, including both maintenance and operations, to foster their development, including required safety training control systems, troubleshooting capabilities and other skills as identified.

Safety and compliance management:

  • Ensuring all safety rules and safe work procedures are followed by themselves and by others working in and around the machinery.
  • Report all injuries and near misses in a timely manner.
  • Actively participate in accident incident investigations
  • Responsible to socialize HITRA and Risk assessment of the job to the contractor.

Plant Integrity, reliability, and Availability delivery:

  • Provide support to operations in running the machines at the operating window to maximize efficiency and productivity and assist troubleshooting issues.
  • Follow work order process effectively from notification till completion of work with proper documentation of maintenance history, report, and input data activity in SAP, to ensure safety, efficient, quality and priority are met.
  • Lead and/or participate in root cause analysis for operating problems including the identification of contributing causes for non-operating events and work to eliminate the root cause for continuous improvement.
  • Troubleshoot mechanical problems by utilizing standardized problem-solving techniques, verifying that proper investigative actions are completed so that root causes may be quickly identified.
  • Performing basic care rounds, ensuring that all equipment is inspected as specified by the Reliability-Centered-Maintenance requirements.
  • Actively share their knowledge to train/mentor other team members, including both maintenance and operations, to foster their development, including required safety training control systems, troubleshooting capabilities and other skills as identified.

Planning and work order process:

  • Effectively utilize and maintain the SAP Plan Maintenance System, including following all computer based and paper processes for work order completion and documentation.
  • Responsible to control usage spare part during daily maintenance and Turnaround.

Key challenges faced on the role:

  • With a limited number of personnel from both INEOS maintenance technicians and contractors but must still be able to complete the work on time, on time and of good quality.
  • Ensure work can be done at normal hours rather than overtime even though manpower is limited in number and work is much.
  • Control maintenance costs by ensuring that part replacements are done correctly, optimizing repairs in internal workshops, and localizing spare parts at local manufacturers.

Any Other Relevant Information

Participate in organizational improvement teams, e.g. Safety Committee, Quality Improvement, Productivity / Cost Reduction Teams, etc. assigned on a rotating basis.

Education & preferred skill

  • Minimum 7 years Diploma Mechanical Engineering and work experienced of petrochemical, or oil and gas plant experienced.
  • Minimum 15 years High school and work experienced of petrochemical or oil & gas plant and turbo machinery.
  • Experience in leading trouble shooting and quick repair of mechanical equipment/facilities under urgent situation to minimize breakdowns.
  • Experienced in applying advanced technologies and best practices of Mechanical maintenance in powerplant, oil and gas or petrochemical industry.
  • Has knowledge and skills on maintenance system and process, such as preventive and predictive maintenance, equipment specific maintenance plan, SAP, and work order process etc.
  • Language skillful English reading, writing.
  • Skillful Personal Computer

Experience

  • Has basic knowledge for Preventive and Predictive Maintenance.
  • Has knowledge for maintain and repair static equipment such as Heat exchanger, tower, Furnace, drum, vessel, valve, piping component, vacuum breaker, flexible joint, bolt and nut, gasket material and check valve.
  • Has experience for repair and PM steam, rotary tube dryer, turbomachinery, vacuum pump, vacuum filter, agitator, and general rotating equipment.
  • Able to do alignment of rotating equipment.
  • Able to interpret working procedure.
  • Has knowledge of measurement and general tools.
  • Able to read equipment cross drawing and isometric drawing.
  • Has knowledge of FRP and cement lining piping.
  • Able to work independently to repair static & rotating equipment.
  • Able to lead the daily maintenance contractor to perform maintain and repair static & rotating equipment.
  • Must service oriented.
  • Able to write maintenance report and equipment problem report.
  • Quick response to call-out is required.

Data PT. Ineos Aromatics Indonesia

Kode Wajib Lapor Ketenagakerjaan Perusahaan atau ID WLPK: 42436.20299.20201020.1-001
ID Wajib Lapor Ketenagakerjaan Perusahaan atau ID WLPK: 8d317405-f7aa-442a-8ad0-e61bc16b8844
ID Klasifikasi Baku Lapangan Usaha Indonesia atau KBLI Business ID: e1825112-0db7-4d9b-a094-6cc37ad98360

Mengenai Korporat

Industri: Industrial Goods & Chemical
EMAIL: ahmad.fadilah@ineos.com
Telepon: (62-254) 570 777
Alamat: Jl. Raya Merak KM 116, Rawa Alum, Grogol, Rw. Arum, Grogol, Kota Cilegon, Banten 42436, Indonesia
Latitude:
Longitude:
Halaman Situs: www.ineos.com

Panduan dan Jadwal Pendaftaran

Harap diingat baik-baik Sebelum mengajukan lamaran pastikan Anda telah sesuai dengan syarat dan keterampilan yang dicari oleh perusahaan agar tidak membuang perhatian, energi dan rupiah Anda. Apabila Anda telah serius memenuhi syarat serta Anda juga merasa cocok dengan Gaji serta Pekerjaan yang ditawarkan serta Lokasi Kerja, maka silahkan kirimkan Porto Anda.

Lowongan bisa dikirimkan sejak 2024-03-08 13:22:56 dan disarankan telah diterima PT. Ineos Aromatics Indonesia sebelum 2024-03-31 16:59:59.

Dari 1 loker yang dibuka, telah diterima setidaknya 0 Peserta.

Anda bisa mendaftarkan lowongan melalui cara berikut ini :

  • Kirim Surel ke ahmad.fadilah@ineos.com
  • Kirim CV secara langsung ke Alamat Perusahaan: PT. Ineos Aromatics Indonesia, Jl. Raya Merak KM 116, Rawa Alum, Grogol, Rw. Arum, Grogol, Kota Cilegon, Banten 42436, Indonesia, (62-254) 570 777, www.ineos.com
  • Mengakses Registrasi Online Berikut:

Apakah masih terdapat pertanyaan terkait lowongan kerja, perusahaan ini dan lain-lain? Anda bisa berpesan ke: fassa.rahmadiana@external.ineos.com

Banten

Lowongan Kerja Tangerang Pada Bidang Sales & Marketing Manager di Sealy Asia Sealy Asia saat ini juga tengah membutuhkan pegawai demi menjalankan fungsi Sales & Marketing Manager (Penjualan) pada Sealy Asia, Tangerang. Selanjutnya, SerikatLoker.com infokan uraian pendek info loker tersebut.  Detail Lowongan Kerja Tingkat Loker: Jenjang atau Kursus Minimum: Sealy…

Banten

Loker Tangerang Pada Peran Sales & Marketing Manager di Sealy Asia Sealy Asia saat ini juga tengah mencari pegawai untuk mengemban tugas-tugas Sales & Marketing Manager (Penjualan) pada Sealy Asia, Tangerang. Selanjutnya, Tim tampilkan uraian sederhana informasi lowongan pekerjaan tersebut.  Info Lowongan Kerja Tingkatan Lowongan: Pendidikan atau Pelatihan Minimal: Sealy…

Banten

Loker Tangerang Untuk Tanggung Jawab Cook Helper Resto di baru-baru ini sedang mencari pegawai agar menduduki peran Cook Helper Resto (Hospitaliti & Pariwisata) pada , Tangerang. Berikut ini, Tim Kami sertai gambaran sederhana info lowongan pekerjaan tersebut.  Info Lowongan Kerja Tingkatan Lowongan: Jenjang atau Workshop Minimum: Kualifikasi :  Pria/Wanita usia…

Banten

Lowongan Tangerang Untuk Bagian Cook Helper Resto di kini sedang membutuhkan karyawan demi mengemban tugas Cook Helper Resto (Hospitaliti & Pariwisata) pada , Tangerang. Di bawah ini, SerikatLoker.com jabarkan rincian pendek informasi lokernya.  Info Lowongan Kerja Tingkatan Loker: Lulusan atau Kursus yang dibutuhkan: Kualifikasi :  Pria/Wanita usia maks 30 tahun…

Jakarta Utara

Lowongan Jakarta Utara Untuk Jabatan Purchasing Officer di Citanusa Group Citanusa Group saat ini sedang membutuhkan tenaga kerja demi mengisi peran Purchasing Officer (Manufaktur, Transportasi & Logistik) pada Citanusa Group, Jakarta Utara. Berikutnya, Penulis informasikan penjelasan sekilas info lowongan tersebut.  Info Lowongan Kerja Jenis Lowongan Kerja: Pendidikan atau Kursus yang…